HTTMT 8-Light HID Hydroponic Ballast Controller with Trigger Cord - 120V/240V 50A Master Electric Box for Indoor Gardening, Greenhouse, Lawn & Patio Plant Growth | Perfect for Commercial Grow Rooms & Home Hydroponic Systems [P/N: ET-TOOL036-WHITE]

Product Description

SPECIFICATIONS:Main Power Voltage: 120V OR 240VReceptacle Type: 8 Universal Outlets120V Max Wattage: 4000W total240V Max Wattage: 8000W total/1000W per OutletMax Amperage: 50ATrigger Cable Voltage: 120VOperating Temperature Range: 32-110°FOperating Humidity Range: 0-99% RH NoncondensingMinimum Relay Operations: 100,000 @ Full LoadImportant Precautions :DO NOT install the Light Controller if you are unfamiliar with electrical wiring and circuits OR if you do not fully understand the instructions.All local and national electrical codes MUST be followed.DO NOT exceed the maximum ratings of this unit.Verify all devices to be controlled by the Light Controller are of the correct voltage.The unit is for indoor use only. Exercise extreme caution in moist or humid environments.Main Power Requirements :The main power source must be supplied for the lights to function.8 Outlets Light Controller, Use only a 50A, 2-pole circuit breaker and #6 AWG wire to provide the main power.Proper connection of the ground wire to the ground lug is critical for safe operation.The Light Controller with universal 120/240V receptacles can be used to operate 120V devices ONLY IF the main power is also wired in at 120V.Installation Notice：DO NOT connect ballasts to the Light Controller until AFTER the main power has been properly installed.Verify trigger cable is disconnected from the external timer or controller.Connect ballast power cables to the receptacles on the Light Controller.Connect the trigger cable to the external timer or controller.